Upload CAD
Capability

Injection molding machine types and tonnage selection.

Machine type and clamp tonnage affect precision, cycle time, energy cost and which parts a shop can run well. Understand the tradeoffs before assuming any supplier machine fits your part.

Ask About Machine FitView DFM Review
Machine intake

Send part size, precision and volume so the right machine class can be matched.

This form is for buyers who need to know whether a hydraulic, electric or hybrid machine, and what tonnage range, fits their part before a mold or quote is discussed.

Part size, shot weight and wall thickness help estimate the tonnage rangeCosmetic tolerance and repeatability needs point toward electric or hybrid machinesProduction volume and cycle-time targets affect which machine class is cost-effective

Machine types

Hydraulic: lower upfront cost, strong clamping force, common for larger or thicker-wall partsElectric: higher repeatability, faster and quieter cycles, lower energy use, better fit for tight-tolerance cosmetic partsHybrid: combines hydraulic clamping with electric injection for a middle ground on cost, speed and precision

How tonnage is estimated

Clamp tonnage is estimated from projected part area, cavity count and material injection pressure, then rounded up to the machine sizes a shop actually runs. Undersized tonnage risks flash and short shots; oversized tonnage adds cost and can hurt cycle time and process control on small parts.

What to send for a machine-fit answer

Part dimensions, wall thickness and approximate shot weightCosmetic tolerance and repeatability requirementsTarget cycle time and annual or first-order volumeMaterial target, since resin pressure and shrinkage affect tonnage and machine choice
Upload CADContact